BAKFlip MX4 for Ford Maverick | Hard Folding Tonneau Cover
Our BAKFlip MX4 is precision-engineered for the 2022+ Ford Maverick 4.5-foot bed, delivering the perfect balance of security and utility. This hard folding tonneau cover features heavy-duty aluminum panels with a premium matte finish that protects your cargo while maintaining easy bed access.
With a best-in-class 300-lb evenly distributed load capacity, the MX4 transforms your Maverick bed into a secure work platform. The four-panel design folds completely against the cab, giving you full bed access when you need it, or folds to multiple positions for partial coverage of longer cargo.
MX4 Construction & Performance Specs
Heavy-Duty Aluminum Panel Construction
The BAKFlip MX4 features our proprietary aluminum composite panels that deliver exceptional strength without adding unnecessary weight to your Ford Maverick. Each panel is constructed with a rigid aluminum core and finished with our FRP (Fiber Reinforced Polymer) coating that resists dents, UV damage, and everyday wear.
The premium matte black finish integrates seamlessly with your Maverick’s bed rails while protecting against sun exposure and the elements. Unlike soft covers that sag or vinyl covers that crack, our aluminum construction maintains its structural integrity through years of use. The panels connect with our exclusive hinge system that allows smooth operation through thousands of open-close cycles.
Fold-Flat Bed Access & Load Capacity
Four-Panel Folding System
Our four-panel configuration gives you complete control over your Maverick bed access. Fold one or two panels for partial coverage when hauling longer items, or fold all four panels completely flat against the cab for unrestricted bed access. Each position locks securely so you can drive with confidence in any configuration.
The MX4 sits just one inch above your bed rails when closed, maintaining your Maverick’s sleek profile and aerodynamics. This low-profile design helps improve fuel efficiency compared to open bed driving while keeping your sight lines clear.
Quick Clamp Installation System
We designed the MX4 with our no-drill clamp system that installs directly onto your Ford Maverick’s bed rails in approximately 30 minutes with basic hand tools. The precision-machined clamps grip your factory bed rails securely without requiring permanent modifications to your truck.
Your MX4 ships with everything needed for installation: pre-assembled panels, rail system, clamps, drain tubes, and detailed instructions. The rails come pre-positioned with the correct clamp spacing for the Maverick’s 4.5-foot bed, eliminating guesswork during setup.
Complete Your Ford Maverick Bed Protection System
Rated 4.8 by verified buyers
BAKFlip MX4 Ford Maverick Installation & Performance Questions
Yes, our BAKFlip MX4 model 448332 is engineered specifically for the 2022, 2023, and 2024 Ford Maverick with the 4.5-foot bed. The cover fits all Maverick trim levels including XL, XLT, and Lariat. Our precision clamp system attaches directly to your factory bed rails without drilling or permanent modifications.
The MX4 is compatible with Mavericks that have the factory spray-in bedliner or drop-in bedliner. If you have aftermarket bed rail accessories, please contact our fit specialists to confirm compatibility before ordering.
Most Maverick owners complete installation in approximately 30 minutes using basic hand tools. You'll need a socket wrench, adjustable wrench, and a tape measure — all standard tools found in most garages.
The MX4 uses our no-drill clamp installation system that attaches to your factory bed rails. The panels arrive pre-assembled and the rails come with clamps pre-positioned for the Maverick's bed dimensions. Our included instructions provide step-by-step guidance, and we offer installation videos on our support page if you prefer visual instructions.
Yes, you can safely drive with the MX4 in any folded position. The four-panel design allows you to fold one, two, three, or all four panels against the cab depending on your cargo needs. Each folded position locks securely using our hinge system.
When folded completely flat against the cab, the MX4 gives you full access to your Maverick's 4.5-foot bed while staying securely attached to the rail system. The aluminum construction remains stable at highway speeds in any configuration.
The BAKFlip MX4 supports up to 300 pounds of evenly distributed weight when fully closed and latched. This capacity applies across the entire surface of the four panels, making it one of the highest-rated folding covers in the industry.
The aluminum panel construction and reinforced hinge system maintain structural integrity under load. You can use the closed cover as a work platform or storage area for gear, coolers, or equipment. Always distribute weight evenly across the panels rather than concentrating load in one area.
The MX4 features comprehensive weather sealing with edge seals around each panel perimeter and between panel joints. Our integrated drain system includes four drain tubes positioned at each corner that channel any water away from your bed and cargo.
Your Maverick bed will stay dry during rain, snow, and automatic car washes. The drain tubes exit near the tailgate to route water away effectively. While the MX4 provides excellent weather protection, it's designed as a tonneau cover rather than a waterproof vault, so extremely heavy downpours or pressure washing directly into seams may allow minimal moisture entry.
Yes, the BAKFlip MX4 is designed to work seamlessly with your Ford Maverick's tailgate operation. You can open and close your tailgate independently without needing to unlatch or adjust the tonneau cover.
The cover sits on the bed rails and doesn't interfere with tailgate movement. Our dual automatic slam latches are positioned on the tailgate panel of the cover, so they remain accessible whether your tailgate is open or closed. This gives you quick cargo access without compromising the security of the cover.
Yes, our BAKFlip MX4 rail system is compatible with several BAK accessories designed for the Ford Maverick. The BAKBox 2 tonneau toolbox mounts directly to your MX4 rails and provides weather-resistant enclosed storage without sacrificing bed space.
You can also add bed rail caps, cargo management systems, and other accessories that work with the MX4 rail design. Our rails are positioned to maintain compatibility with most Maverick bed accessories. Check our accessories page or contact our team for specific compatibility questions about aftermarket products you're considering.